Chevy Colorado Air Dam Removal
Chevy Colorado Air Dam Removal. I think gm finally listened. Gm adds these for increased aerodynamics, promote cooling, and to in.
Three 7mm screws holding the bumper to each of the fenders, and four torx screws on the underside of the bumper. You do not need to remove the entire front fascia or cut anything. It took literally took 5 minutes, and it was off.
Three 7Mm Screws Holding The Bumper To Each Of The Fenders, And Four Torx Screws On The Underside Of The Bumper.
We are exploring and discovering new. There are 6 torx screws in each wheel well liner to be removed, so that you can access the fender screws. Press j to jump to the feed.
Thank You Everyone For The Comments!
Remove the plastic waffle in front of each wheel attached to the bumper, then take the 2 10mm bolts that hold the center of the bumper to the frame off. Press question mark to learn the rest of the keyboard shortcuts. Great tools to remove the front air dam on a chevy colorado.
Enter Your Ride Here To Be A Part Of This Months Ride Of The Month Challenge!
It took literally took 5 minutes, and it was off. Jump to latest follow hey everyone! Subscribe!!i finally removed the ari dam, after 1000+plus comments we got it people!!
Be Nice To See A Video Or Pictures Of The Process.
The head of the screws were even right side up….or correct side up. Gm adds these for increased aerodynamics, promote cooling, and to in. I took mine off, it was held on by 13 screws, and all i needed was a 7mm socket, and a t15 bit.
An Experiment Two Years In The Making.
Once this is done, u can push the plastic out far enough without breaking anything to get the 13 t15 screws out. The torx screws are really hard to get to. The 2022 colorado front air dam is super easy to remove.
Post a Comment for "Chevy Colorado Air Dam Removal"